How to disassemble and reassemble Handso

In this guide we will show you how to disassemble and reassemble your Handso, in case you want to clean it or for any other need with this video you will be able to do it.Do not perform these operations in the bathroom, Handso is also composed of small parts, which could inadvertently fall down the drain.  

Learn more

How to mount the lanyard

Inside your Handso once you unscrew the lid to insert the bar of soap you will find the silicone strap that will allow you to handle it more securely and hang it in the shower from a hook. Here is your Handso Open the lid by unscrewing it counterclockwise, inside you will find the strap. Pick it up and put it back next to Handso Now grab the lanyard and pass the thinner end through the loop present on Handso, exactly as you see in the photo. If you grasp the lanyard near the end the operation will be easier. Once the buttonhole is fed in, re-grab the lanyard on the other side and slide it to the end, as in the second photo.There are only two steps left. Take the silicone end of the lanyard and pass it through the opposite end.At this point you will just need to continue pulling on the silicone end. Your lanyard is now properly attached to your Handso.

Learn more

How to use the Mag Holder

The Mag Holder In this guide we will show you how to use the Mag Holder. This accessory is designed to add a bit of magic to your shower by making it neater and easier to clean. Inside its package you will find: A metal disc with a double-sided face A magnet also with a double-sided adhesive side Take the metallic disc and the cover that conceals the bristles of Handso. Gently remove the white film on one side of the metallic disc Once the white film is removed, apply the double-sided adhesive part to the center of Handso's lid. As you can see there is a circular shaped invitation on the lid. Once the disk is in place apply pressure to it to make it adhere evenly. You can place a weight on top to improve the result. NB: It is advisable to clean and degrease the lid surface with alcohol so as to ensure better bonding. Now it’s time for the magnet. Go to your bathroom and find a suitable and convenient place where you would like to keep your Handso every time you take a shower. As with the cover, degrease and clean the surface before applying the magnet. At this point, carefully remove the white film. After removing the film, apply the magnet to the surface and gently press it to make it adhere. Before attaching Handso we recommend that you leave the magnet in place for a few hours so that the double-sided adhesive has a chance to set without any weight applied. You could do this at night before going to bed. Now you can bring your Handso close to the magnet, and like magic, it will be attracted and remain in place.

Learn more

First shower with Handso

Handso combined with our Body Soap and a small amount of water can make a soft lather ready to cleanse your body. Place the bristles on your body, apply a little pressure to your skin and use it just like any sponge or brush. We want your first experience with Handso to be fulfilling and easy; therefore, we have prepared a list of tips. 🧼 Before showering take a moment to familiarize yourself with Handso and Body Soaps; Use our Body Soaps the first time you use them, (each 50g Body Soap guarantees a dozen showers) they are cold processed this makes them easily soluble and perfect for Handso; Fill Handso with lukewarm or hot water, this will help foam production, start shaking it for at least a minute while you are in the shower, do not rush it; Pass Handso over the body in gentle movements, describing small circles and exerting light pressure on the skin. But let's go in order, here's your Handso The silicone bristles are hidden by a "lid" that serves two functions: to protect them and to prevent any soap and water residue from leaking out of Handso while you are carrying it on trips or to the gym.To open this "lid," you simply pull it open as in the video. To insert the soap unscrew the cap that is on the opposite half from the bristles, just as you would with a jar cap.This cap can stay in 3 positions: closed; dry; open. As you switch to the drying position you will hear a small "click." Open it completely and insert the bar of soap. Now fill Handso with water up to the side holes and screw the cap back on. Now shake Handso at least for a minute while you are under the water. Pull off the "lid" and start soaping yourself.NB: If you don't want to put the "lid" down because you are at the gym or outside your house remember that you can stick it on the cap you unscrewed to insert the bar of soap. Now pass Handso over your body applying light pressure to the skin describe circular motions and proceed like this all over your body. Remember the amount of foam produced depends on various factors: cold-processed soaps such as our Body Soaps dissolve more easily, creating more lather; fill Handso with warm or hot water for best results; the more pressure you exert while passing handso on the body the more foam will come out. In general, at the beginning the amount of foam is less than the amount that will come out as you progress all over the body, do not rush and take your time. When you have finished washing pass Handso under water to remove the foam on the outside cover the bristles with the lid. To best store the bar of soap inside proceed as follows: unscrew the cap and rinse the inside well, removing any residual foam; close the cap and leave it in the drain position. At this point you can hang it with the string or magnetic holder. Excess water will drain out of the side slots by itsel.

Learn more