Quick Guide

Quick Guide

in Guides

Parts and Functions

Here is Handso in all its details, discover the functions of each of its parts.

Product features of a scrubber with labeled parts and a wooden soap bar.

How to mount the lanyard

Step 1 - Open the cap by unscrewing it counterclockwise, inside you will find the Laynard. 

Step 2 - Grab the strab and pass the thinner end through the loop present on Handso, exactly as you see in the video. If you grasp the lanyard near the end the operation will be easier. Once the buttonhole is fed in, re-grab the lanyard on the other side and slide it to the end. Take the silicone end of the lanyard and pass it through the opposite end. At this point you will just need to continue pulling on the silicone end.

Step 3 - Your laynard is now properly attached to your Handso.

How to mount the magnetic holder

In the package you'll find: 1x Magnet, 1x Thin metal disc

Step 1 - Separate the thin metal disk from the magnet. Set the magnet aside and remove the double-sided tape from the metal disk. Place and adhere the disk to the center of the Handso lid. A round footprint will help you position it correctly.

Step 2 - Go to the bathroom and thoroughly clean the surface where you want to attach the magnetic mount. Use a degreaser or limescale remover. Dry the surface with a cloth.

Step 3 - Remove the double-sided tape from the magnet. Position and adhere the magnet to the surface you just cleaned. Apply pressure with your hand for about 30 seconds.

NOTE: Leave the magnet in place for at least 12 hours before hanging Handso. Avoid showering during this time (humidity could compromise the double-sided tape's proper adhesion).

First shower

Step 1 - Unscrew the Handso cap and insert your preferred Body Soap or a cold-pressed soap bar.

Step 2 - Fill Handso with water. When the body soap is new, fill up to the slots; when it wears down, you can use less water. Close Handso by screwing the cap back on.

Step 3 - Create the foam by shaking Handso for a few seconds.

Step 4 - Remove the bristle protector cap and start running the bristles over your skin. Focus on one area, and as soon as you see foam appear on the skin, slowly move to other parts of your body.

Step 5 - When you have finished washing, rinse Handso under the shower stream, unscrew the cap to the drying position. Excess water and foam will exit through the slots. Now you can hang Handso and let it dry until your next shower.

 

Related Posts

How to mount the lanyard

How to mount the lanyard

Inside your Handso once you unscrew the lid to insert the bar of soap you will find the silicone strap that will allow you to handle it more securely and hang it in the shower from a hook. Here is your Handso Open the lid by unscrewing it counterclockwise, inside you will find the strap. Pick it up and put it back next to Handso Now grab the lanyard and pass the thinner end through the loop present on Handso, exactly as you see in the photo. If you grasp the lanyard near the end the operation will be easier. Once the buttonhole is fed in, re-grab the lanyard on the other side and slide it to the end, as in the second photo.There are only two steps left. Take the silicone end of the lanyard and pass it through the opposite end.At this point you will just need to continue pulling on the silicone end. Your lanyard is now properly attached to your Handso.

Learn more
How to mount the Magnetic Holder

How to mount the Magnetic Holder

In this guide, we'll show you how to install and use the Magnetic Holder. This accessory is designed to add a touch of magic to your shower, making it tidier and easier to clean. In the package you'll find: 1x Magnet, 1x Thin metal disc Step 1 - Separate the thin metal disk from the magnet. Set the magnet aside and remove the double-sided tape from the metal disk. Place and adhere the disk to the center of the Handso lid. A round footprint will help you position it correctly. Step 2 - Go to the bathroom and thoroughly clean the surface where you want to attach the magnetic mount. Use a degreaser or limescale remover. Dry the surface with a cloth. Step 3 - Remove the double-sided tape from the magnet. Position and adhere the magnet to the surface you just cleaned. Apply pressure with your hand for about 30 seconds. NOTE: Leave the magnet in place for at least 12 hours before hanging Handso. Avoid showering during this time (humidity could compromise the double-sided tape's proper adhesion).  

Learn more
First shower with Handso

First shower with Handso

Handso combined with our Body Soap and a small amount of water can make a soft lather ready to cleanse your body. Place the bristles on your body, apply a little pressure to your skin and use it just like any sponge or brush. We want your first experience with Handso to be fulfilling and easy; therefore, we have prepared a list of tips. 🧼 Before showering take a moment to familiarize yourself with Handso and Body Soaps; Use our Body Soaps the first time you use them, (each 50g Body Soap guarantees a dozen showers) they are cold processed this makes them easily soluble and perfect for Handso; Fill Handso with lukewarm or hot water, this will help foam production, start shaking it for at least a minute while you are in the shower, do not rush it; Pass Handso over the body in gentle movements, describing small circles and exerting light pressure on the skin. But let's go in order, here's your Handso The silicone bristles are hidden by a "lid" that serves two functions: to protect them and to prevent any soap and water residue from leaking out of Handso while you are carrying it on trips or to the gym.To open this "lid," you simply pull it open as in the video. To insert the soap unscrew the cap that is on the opposite half from the bristles, just as you would with a jar cap.This cap can stay in 3 positions: closed; dry; open. As you switch to the drying position you will hear a small "click." Open it completely and insert the bar of soap. Now fill Handso with water up to the side holes and screw the cap back on. Now shake Handso at least for a minute while you are under the water. Pull off the "lid" and start soaping yourself.NB: If you don't want to put the "lid" down because you are at the gym or outside your house remember that you can stick it on the cap you unscrewed to insert the bar of soap. Now pass Handso over your body applying light pressure to the skin describe circular motions and proceed like this all over your body. Remember the amount of foam produced depends on various factors: cold-processed soaps such as our Body Soaps dissolve more easily, creating more lather; fill Handso with warm or hot water for best results; the more pressure you exert while passing handso on the body the more foam will come out. In general, at the beginning the amount of foam is less than the amount that will come out as you progress all over the body, do not rush and take your time. When you have finished washing pass Handso under water to remove the foam on the outside cover the bristles with the lid. To best store the bar of soap inside proceed as follows: unscrew the cap and rinse the inside well, removing any residual foam; close the cap and leave it in the drain position. At this point you can hang it with the string or magnetic holder. Excess water will drain out of the side slots by itsel.

Learn more